12″ x 12″ Hardwood Frame

Our handmade hardwood frames perfectly accommodate our 12″ x 12″ hardwood panels.

Cradles are 1.75″ deep
Inner dimensions 12.125″ x 12.125″
Outer dimensions 12.875″ x 12.875″
Frames will accommodate panels thicknesses up to 1/4″ or 7mm
Handmade in USA

Shipping within the U.S. only

Mounting Art2Life panels in frames

Mount the panels by placing a small drop of white glue on each of the four corners – just a small dot. If you’d like a more permanent joining of the panel to the frame, just use more glue around the perimeter of the panel.

Lay the panel into the frame. Note that if you’re using Art2Life panels, there will be about 1/8″ reveal between the panel and frame, which is intentional.

You may want to have a small paintbrush, slightly damp with clean water, to get into the 1/8” gap and clean-up any excess glue.

Then, lay a piece of clean paper or plastic over the artwork and frame, and weigh it down with some heavy books and let it dry for a few hours.

If you’d like to remove the artwork later, it’s easy to pop it out from the back.

Thank you for your purchase!
The Art2Life Team